Using an Atari ST as Unix/Linux Terminal
Jump to navigation
Jump to search
According to Wikipedia, a text terminal is "a serial computer interface for text entry and display". It was the principal way of communicating with computers in the 70's. As a Text terminal requires has very basic computing needs, it is quite easy to emulate in software.
For using your atari ST as a Unix/Linux terminal you will need:
- a serial port, or an USB to serial adpter on your Unix/Linux computer
- a null modem cable to plug on the serial port of the ST
- an Atari ST or better with Terminal Emulator software. We recommend to use TAZ.
USB serial adapter on Linux
An USB serial adapter looks like this:
You can just throw the CD driver away, as Linux has buit in support for these devices.
When plugged, you can see it has been recognized using the dmesg command.
[137052.801088] usb 5-1: new full speed USB device using uhci_hcd and address 7 [137053.000142] usb 5-1: New USB device found, idVendor=0403, idProduct=6001 [137053.000151] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [137053.000158] usb 5-1: Product: USB Serial Converter [137053.000162] usb 5-1: Manufacturer: FTDI [137053.000167] usb 5-1: SerialNumber: FTFNLXMS [137053.000422] usb 5-1: configuration #1 chosen from 1 choice [137053.008214] ftdi_sio 5-1:1.0: FTDI USB Serial Device converter detected [137053.008277] usb 5-1: Detected FT232RL [137053.008282] usb 5-1: Number of endpoints 2 [137053.008287] usb 5-1: Endpoint 1 MaxPacketSize 64 [137053.008292] usb 5-1: Endpoint 2 MaxPacketSize 64 [137053.008296] usb 5-1: Setting MaxPacketSize 64 [137053.009259] usb 5-1: FTDI USB Serial Device converter now attached to ttyUSB0
Most important to us here is the last line, which tells that the kernel has assigned the name /dev/ttyUSB0 as a serial port.