Atari ST to VGA adaptor: Difference between revisions
>Muguk No edit summary |
>Muguk mNo edit summary |
||
| Line 1: | Line 1: | ||
Atari ST to VGA adaptor | Atari ST to VGA adaptor | ||
----------------------- | ----------------------- | ||
Claes Holmerup - 17 Aug 1998 | |||
You can use an SVGA monitor with an adaptor cable (which is rather easy | |||
to assemble) to get a monochrome picture. Some VGA monitors _may_ work, | You can use an SVGA monitor with an adaptor cable (which is rather easy to assemble) to get a monochrome picture. Some VGA monitors _may_ work, but all SVGA (or multiscan, multisync or whatever) should work as far as I know. | ||
but all SVGA (or multiscan, multisync or whatever) should work as far as | |||
I know. | |||
Here's how you make your adaptor: | Here's how you make your adaptor: | ||
| Line 22: | Line 18: | ||
The trick here is that the monochrome signal is fed to all the inputs on | The trick here is that the monochrome signal is fed to all the inputs on the SVGA-monitor, which gives you a very nice monochrome picture. Even though the monitor in fact is a color monitor, you won't be able to see a color picture because of the construction of the computer (and the monitor). | ||
the SVGA-monitor, which gives you a very nice monochrome picture. Even | |||
though the monitor in fact is a color monitor, you won't be able to see | If you get your hands on a monitor which handles frequencies down to 15kHz, it's a whole new deal - then you should be able to build yourself a cable with a switch between mono and color (a little more complicated, involving a 4-way switch, but possible all the same). | ||
a color picture because of the construction of the computer (and the | |||
monitor). If you get your hands on a monitor which handles frequencies | Just about no modern monitors go lower than 30kHz, so in most cases there is no other choice than mono - but since most useful programs (IMHO) run in monochrome, it's the best alternative anyway... | ||
down to 15kHz, it's a whole new deal - then you should be able to build | |||
yourself a cable with a switch between mono and color (a little more | |||
complicated, involving a 4-way switch, but possible all the same). Just | |||
about no modern monitors go lower than 30kHz, so in most cases there is | |||
no other choice than mono - but since most useful programs (IMHO) run in | |||
monochrome, it's the best alternative anyway... | |||
Good luck! | Good luck! | ||
Claes | Claes | ||
claes.holmerup@mailbox.swipnet.se | claes.holmerup@mailbox.swipnet.se | ||
http://come.to/claes.holmerup | [http://come.to/claes.holmerup] | ||
This will only give you ST-HIGH but at least you don't need a real Atari monitor then. | This will only give you ST-HIGH but at least you don't need a real Atari monitor then. | ||
Revision as of 07:55, 9 January 2007
Atari ST to VGA adaptor
Claes Holmerup - 17 Aug 1998
You can use an SVGA monitor with an adaptor cable (which is rather easy to assemble) to get a monochrome picture. Some VGA monitors _may_ work, but all SVGA (or multiscan, multisync or whatever) should work as far as I know.
Here's how you make your adaptor:
Atari (13-pin DIN) SVGA (15-pin HD D-type)
-----------------------
11 (Monochrome output) 1,2,3 (Red, Green, Blue inputs) 12 (Vertical sync) 14 9 (Horizontal sync) 13 13 (Ground) 4,5,6,7,8,10,11 4 (Monochrome detect) short to ground (as above)
The trick here is that the monochrome signal is fed to all the inputs on the SVGA-monitor, which gives you a very nice monochrome picture. Even though the monitor in fact is a color monitor, you won't be able to see a color picture because of the construction of the computer (and the monitor).
If you get your hands on a monitor which handles frequencies down to 15kHz, it's a whole new deal - then you should be able to build yourself a cable with a switch between mono and color (a little more complicated, involving a 4-way switch, but possible all the same).
Just about no modern monitors go lower than 30kHz, so in most cases there is no other choice than mono - but since most useful programs (IMHO) run in monochrome, it's the best alternative anyway...
Good luck! Claes claes.holmerup@mailbox.swipnet.se [1]
This will only give you ST-HIGH but at least you don't need a real Atari monitor then.
Back to DIY_Hardware_or_"mods"