Accelerators: Difference between revisions
Jump to navigation
Jump to search
>Catmando |
>Catmando |
||
| Line 21: | Line 21: | ||
===Atari Falcon=== | ===Atari Falcon=== | ||
*Afterburner - Top of the range for its time (mid-nineties) 68040 booster. | |||
*Blow Up 3 - Boosted '030 to 40mhz, added fastram and screen resolution enhancer, another one from Atari Workshops. | |||
*Centurbo 1 - Rodolphe Czuba's version of this. | |||
*Centurbo 2 | |||
*[[CT60]] / [[CT60|CT63]] - [http://www.powerphenix.com/CT60/english/welcome.htm Power Phenix] 68060 accelerator for the [[Atari Falcon]]. | *[[CT60]] / [[CT60|CT63]] - [http://www.powerphenix.com/CT60/english/welcome.htm Power Phenix] 68060 accelerator for the [[Atari Falcon]]. | ||
*DX-3 board - from OXO Concept | |||
*HighSpeed40 - This was in 1996 and you could switch between 20 and 40MHz cpu. | |||
*Mighty Sonic 32 (with this one you have to put the 030 from the f030 on the accel board), fastram | |||
*Mighty Mic 32 (no fastram) | |||
*Nemesis - System overclocker to 150% of normal Falcon speed, handled by Titan Designs/Black Scorpion in UK | |||
*[[Phantom]] - Cheaper Czech-built Nemesis style overclocker. | |||
*Power Up - Simple 16 to 32mhz cpu clocker, very early, distributed by Atari Workshops in the UK. | |||
*[[Power Up 2 by System Soltuions]] - 32Mhz accelerator for Atari Falcon | *[[Power Up 2 by System Soltuions]] - 32Mhz accelerator for Atari Falcon | ||
*Skunk 32 | |||
*Speed Resolution board 40mhz by Hard&Soft | |||
*Tempest - PowerPC based, extensively written about, prototyped, but not made?! This started as contemporary with CT2! | |||
*Veloce Falcon - To take Falcon to 40mhz, fastram capability, modelled on Veloce STe, never produced? | |||
*Wizztronics Barracuda 040 - 33 mhz 6840 and two vme-bus-slots. Optional FastRam-card, 128 megs. (never sold?) | |||
Back to [[Peripherals for Atari computers]] | Back to [[Peripherals for Atari computers]] | ||
[[Category:Hardware Components]] | [[Category:Hardware Components]] | ||
[[Category:Peripherals]] | [[Category:Peripherals]] | ||
Revision as of 07:25, 9 December 2015
The beginnings of a list of accelerators boards available for the TOS range.
Atari ST Range
- AdSpeed ST - ICD - 16Mhz accelerator. Software switchable between 8/16Mhz
- JATO 16Mhz Board - John Russell Innovations - 16Mhz accelerator board.
- CMI 16Mhz Board - Creative Microsystems Inc. - 16Mhz accelerator board. Also adds sockets for Blitter chip and 68881 FPU. It also has a method to speed up TOS access called fastROM.
- Turbo16 - Fast Technologies - 16Mhz accelerator board.
- SST - Gadgets by Small & Fast Technologies - 16Mhz 68030 accelerator board.
- Turbo 20/25 by System Solutions - Accelerator for ST and Mega ST
- T28 and T36 by System Solutions - 28Mhz and 36Mhz accelerator for STF, STFM, STE and Mega ST
- Plus Cache ST by Atari Workshop - 16Mhz accelerator for STFM
- PAK 68/3 by System Solutions - 32/40/50Mhz accelerator for STFM, STE (with adapter), Mega ST & Mega STE
Atari Falcon
- Afterburner - Top of the range for its time (mid-nineties) 68040 booster.
- Blow Up 3 - Boosted '030 to 40mhz, added fastram and screen resolution enhancer, another one from Atari Workshops.
- Centurbo 1 - Rodolphe Czuba's version of this.
- Centurbo 2
- CT60 / CT63 - Power Phenix 68060 accelerator for the Atari Falcon.
- DX-3 board - from OXO Concept
- HighSpeed40 - This was in 1996 and you could switch between 20 and 40MHz cpu.
- Mighty Sonic 32 (with this one you have to put the 030 from the f030 on the accel board), fastram
- Mighty Mic 32 (no fastram)
- Nemesis - System overclocker to 150% of normal Falcon speed, handled by Titan Designs/Black Scorpion in UK
- Phantom - Cheaper Czech-built Nemesis style overclocker.
- Power Up - Simple 16 to 32mhz cpu clocker, very early, distributed by Atari Workshops in the UK.
- Power Up 2 by System Soltuions - 32Mhz accelerator for Atari Falcon
- Skunk 32
- Speed Resolution board 40mhz by Hard&Soft
- Tempest - PowerPC based, extensively written about, prototyped, but not made?! This started as contemporary with CT2!
- Veloce Falcon - To take Falcon to 40mhz, fastram capability, modelled on Veloce STe, never produced?
- Wizztronics Barracuda 040 - 33 mhz 6840 and two vme-bus-slots. Optional FastRam-card, 128 megs. (never sold?)
Back to Peripherals for Atari computers