Exposé: Difference between revisions
Jump to navigation
Jump to search
>Catmando |
>Catmando No edit summary |
||
| Line 5: | Line 5: | ||
The hardware can be used with Apex Media v2.41 by Black Scorpion Software | The hardware can be used with Apex Media v2.41 by Black Scorpion Software | ||
The board does require you to open up the Falcon 030 case and attach Exposé to the | The board does require you to open up the Falcon 030 case and attach Exposé to the Falcon's expansion connector inside. | ||
Installers will have to decide how to get the digitisers cable to the outside of the case. A simple method is to cut an hole and then put a grommet around the cable tidying up the case. | Installers will have to decide how to get the digitisers cable to the outside of the case. A simple method is to cut an hole and then put a grommet around the cable tidying up the case. | ||
Latest revision as of 04:15, 28 July 2019
Exposé is a colour digitiser for the Atari Falcon by Titan Designs.
The hardware consists of a circuit board and a colour control box (power cable reversed in photo).
The hardware can be used with Apex Media v2.41 by Black Scorpion Software
The board does require you to open up the Falcon 030 case and attach Exposé to the Falcon's expansion connector inside.
Installers will have to decide how to get the digitisers cable to the outside of the case. A simple method is to cut an hole and then put a grommet around the cable tidying up the case.
The colour control box has it's power cable reversed (see photo)
Gallery
Board
Colour control box
Exposé manual installation instructions
Exposé manual cover
Apex Media software
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)